Questions?  Email us:
InLineFabrication@Gmail.com


Fits Dillon, Hornady, RCBS, Etc.

These Patent Pending hi intensity LED systems put the light right where you need it......inside the cage of your reloading press.  Super thin 6 LED profile attaches to the inside of the upright of your press and floods the shellplate and your cases with light.  Double checking powder level before setting each bullet is an important safety step and now becomes easier than ever before.  I will let the photos speak for themselves.   Each 12 volt light system comes with a 4 inch long, 6 LED strip, inline on\off switch and a 110 to 12v adapter. (No more fading batteries) Also comes with 2 self adhesive wire routing anchors and zip ties.

I have included in the design, a metal strip that if you wish, you can bend the upper end of the light forward to shine even more light down towards the shellplate.  (If your press has the required clearance with the ram all the way up.)

The LED strip comes with an agressive doublestick tape installed on the back to attach to your press.  All you gotta to do is clean the area with alcohol, let it dry, stick it on, plug it in and get to work!




Left and right side of the press arm.   Plenty of light to check your powdercharge and observe everything happining on your shellplate. (Only light on in the room is the LED itself.)



Lots of light!                                            Super bright 6 LED strip gets the job done.

Lighting systems are $24.50 (Free\combined shipping) if purchased with something else from the site (Lever, Ultramount, etc) or $29.50 if purchased alone.

Please use this button if also purchasing another item (That includes shipping) from this site. $24.50

Please use this button if purchasing only the LED system. $29.50 (Shipping cost)

 Not close to an outlet?   No worries!

AA Battery packs available and can be substituted for 110 power supply at no extra cost.  Long battery life.
(Just add the LED kit of your preference to cart and process normally, then follow up with an email to me to make the change)
(Batteries not included )


 

 

Extra LED pigtails.


Extra Standard LED pigtails with quick connect with 15" cable. Includes adhesive anchors for wiring routing, alcohol pad and zipties.
$6 each if included with another purchase from the site that includes shipping.

$11.50 if purchased by itself. (Shipping, USPS Priority mail.)

Extra Short LED pigtails with quick connect and 15" cable.  Includes adhesive anchors for wiring routing, alcohol pad and zipties.
$6 each if included with another purchase from the site that includes shipping.  (Combined shipping discount.)

Please use this button if purchased by itself. (Shipping, USPS Priority mail.)
$11.50

Extra "Y"'s

$4.50

Complete ceiling Kit
Complete LED kit with "Ceiling" option.  This Patent Pending kit includes, power supply with 0n\off switch, "Y" adapter, (1) 4" LED w\quick connect, (1) 2" LED w\quick connect, adhesive and zip ties to anchor\route wires.  This kit is for presses (Like the Hornady Lock N Load and the Dillon 650) that have enough room at "ceiling" to install the 2" light in a downward fashion to flood the shellplate with even more light.  Plenty of bright, white light with-out being too much.





Ceiling kit is $40 Shipped.

Not close to an outlet?   No worries!

AA Battery packs available and can be substituted for 110 power supply at no extra cost.  Long battery life.
(Just add the LED kit of your preference to cart and process normally, then follow up with an email to me to make the change)
(Batteries not included )

Sample Photo's and installed LED reference pictures.






LED Press Installation photos.

Hornady LNL                                                                         RCBS Rock Chucker
 

Dillon 550                                                                            Dillon 650



Photo of the 550 LED installed on a Dillon 550.  As you can see, with careful placement, there's juuuuust enough room on the inside of the forward press upright.





Photo of an LED properly installed on a Dillon 650. Note the wire routing. 
The led strip is about 3\16 off the edge of the press for proper placement.





Gunsafe LED lighting systems.
 
Infrared switching.  Plug n play. No switches, brackets,etc to mess with.  Linked Center, Left & Right LED strips flood your safe with clean, pure white light.  Operation is easy. When you open the door, the infrared sensor mounted on the wall "see's" you and activates the lights. When you close the door, they turn off.  Doesn't matter if the room is dark or light. 

LEDS will attach to carpeted or metal safe walls.  Kit comes with, 3 LED strips w\attachment velcro already installed, 110 power supply, extension cord, and infrared motion sensor.



Measure the width of your safe and order the closest version.  Custom widths are available as well, just drop me an email.
LED Safe Lighting kits are $110  Shipped to your door. (USPS Priority. 2,3 day service)

18" Wide Safe.

20" Wide Safe.

30" Wide Safe.

36" Wide Safe.

40" Wide Safe.

Custom width. (Please follow up with desired width via email)

Email.
InLineFabrication@Gmail.com

"SkylightTM" LED lighting Kit for the Dillon 550.

LED lighting system for the 550.....perfected.  This Patent pending reloading press LED lighting system consists of a machined bushing with an embedded 8 LED pod which installs into the center hole of the toolhead.   Super bright, straight down focused light, out of the way, no heat and does the job perfectly.  Average lifespan is 75,000 hours.

Caliber changes are quick and easy, just pop it out, change the toolhead, pop it back in and get to back work. The system comes complete with a 110 plug in adaptor, on\off switch, wire routing anchors and zip ties. As with all Inline Fabrication lighting systems, these have our lifetime "no worries" warranty.(Also available with AA battery pack instead of 110 wall plug-in if needed.)

They are $34 Shipped. ( USPS Priority. )

"SkylightTM" LED lighting Kit for the Dillon 650.
The Skylight kit for the Dillon 650 also has a machined bushing with an embedded 8 LED pod that installs into the center hole of the toolhead as the 550 does. However, additionally, the system also has a 4" 6 LED strip that attaches to the inside of the press frame.   Super bright, , out of the way, no heat and does the job perfectly.  Average lifespan is 75,000 hours.

Caliber changes are quick and easy, just pop it out, change the toolhead, pop it back in and get to back work. The system comes complete with a 110 plug in adaptor, on\off switch, wire routing anchors and zip ties. As with all Inline Fabrication lighting systems, these have our lifetime "no worries" warranty. (Also available with AA battery pack instead of 110 wall plug-in if needed.)


They are $44 Shipped. ( USPS Priority. )

"Skylight" LED lighting system for the Hornady LNL AP.
The Skylight kit for the Hornady LNL AP features a machined bushing with an embedded 8 LED pod that drops into the center hole of the toolhead.   Additionally, the system also has a 4" 6 LED strip that attaches to the inside of the press frame.   Super bright, , out of the way, no heat and does the job perfectly.  Average lifespan is 75,000 hours.

The system comes complete with a 110 plug in adaptor, on\off switch, wire routing anchors and zip ties. As with all Inline Fabrication lighting systems, these have our lifetime "no worries" warranty. (Also available with AA battery pack instead of 110 wall plug-in if needed.)

They are $44 Shipped. ( USPS Priority. )