Questions?  Email us:
InLineFabrication@Gmail.com
 


On this page you will find:
1. Roller levers for the Dillon 550, 650,1050
2. Centering inserts for the Dillon Superswage.
3. Roller lever adapter for Dillon Square Deal.
4. Ultramount press riser systems for 550,650 & Square Deal.
5. Dillon bullet tray.
6. Dillon 650 & 550 Toolheads.

Do this: 
Stand in front of your press, lower the lever completely, let go, stand up straight, then look down and realize just how far you have been bending over to fully actuate your press.  Then, while still standing up straight, use a tape measure to measure from the center of your closed fist to the center of your current handle, that difference is where we come in.  If your measurement is significantly more or less than the versions offered below, custom built levers to your spec's are no problem.    Your back will thank you!   But don't just take my word for it.  Ask around in the popular firearm forums.     



Dillon 1050 roller

This custom lever is the same height as the factory lever, but features a forward offset to increase comfort and ergonomics.



They are $50 shipped to your door.

Dillon 650

Dillon 650 Roller lever with short offset. (Offers 3.5 inches of back relief)
(This our most popular model for the 650). 
Very comfortable priming operation, Ergonomic, roller handle, back friendly and positions you perfectly in front of the press to see into your cases prior to setting a bullet. Primer seating performance and "feel" is enhanced significantly over stock lever.



650 with "Ceiling" LED lighting kit installed.    Excellent addition to your Dillon machine!   


Here are some pictures to illustrate the back saving properties of the "ERGO" lever.  The benchtop is 38" tall.

Factory ball measurement.    Modified "ERGO" Roller lever measurement.                     
     

They are $55 shipped to your door.

Dillon 550 

Dillon 550 Roller lever with short offset. (Offers 3.5 inches of back relief)
(This is our most popular version for the 550)
Very comfortable priming operation, ergonomic, roller handle, back friendly and positions you perfectly in front of the press to see into your cases prior to setting a bullet. Primer seating performance and "feel" is enhanced significantly over stock lever.


 

They are $55 shipped to your door.

Now available in beautiful high speed, low drag black powdercoat. ($5 additional)
(Please use this button for powdercoated 3.5 550 lever)

Centering inserts for the Dillon SuperSwage.

These little guys are lifesavers. (Actually casesavers)
Machined Delrin inserts center the .223 and .308 cases perfectly for the swage, they center the brass left,right and also set the case to proper elevation for a perfectly centered case every time.  Makes a big difference and increases speed and accuracy.  Set comes with guides for .223 and .308 & instructions.



They are $22 with purchase of a another item on the site (Free shipping),or $27 by themselves with Priority shipping.


Please use this button if purchasing another item from the site $22

Please use this button to purchase alone. $27

Here's a video of a simple modification you can do to your Superswage with a rubber band and a piece of string to increase production.

Roller Conversion Block For Dillon Square Deal.

Convert your Dillon square deal lever to a super comfortable roller lever. 

Kit comes with Roller handle, Conversion block & finishing plug.            




They are $40 shipped to your door. (Always USPS Priority mail. 2-3 day service)

Ultramount press riser system for Dillon 650

Smooth clean lines, beautiful black powdercoat and 3\16" thick steel riser system lifts your press 9 5\8" to get that shellplate closer to your eyes, increase stability and ergonomics of your reloading system.

Ultramount top plates are available pre drilled or tapped for common reloading presses. Dillon,Lee,Redding, etc.   So down the road if you decide to change presses or want to use one ultramount for multiple presses, all you need to do is purchase and swap the top plate.

(Ultramount system pictured below also shows optional bracket to support the factory Dillon bullet tray.  Available below)



Ultramount for Dillon 650 is $75 shipped (USPS Priority)

Dillon 650 Ultramount options.



Dillon bullet tray support bracket for 650 Ultramount.
(Designed to be used with or with-out a press riser system if you want to use the Dillon bullet tray)
(Dillon Bullet tray not included, but we do have them available here if you do not have one already)



  Support bracket is $10 when purchased with the Ultramount.

$15 by itself.(Shipping cost.)

Double bullet tray system for the 650 Ultramount.
Completely adjustable 2 bin tray system puts the bullets where you need them and provides another bin to keep things organized.

Double bullet tray system for 650 Ultramount is $48 shipped (USPS Priority)

Ultramount press riser system for the Dillon 550.


Smooth clean lines, beautiful black powdercoat and 3\16" thick steel riser system lifts your press 9 5\8" to get that shellplate closer to your eyes, increase stability and ergonomics of your reloading system.
(Shown with optional adjustable empty case bin, LED lighting, Roller lever and factory Dillon bullet tray.)


Ultramount for Dillon 550 is $75 shipped (USPS Priority)
(Available with or with-out support tab for factory Dillon bullet tray at no extra charge.)

With support tab for Dillon bullet tray.

With-out support tab for Dillon bullet tray.

Empty case bin system for Dillon 550
Includes the adjustable pivoting arm assembly, bin and hardware.  Everything you need to have your cases at the ready.


Empty case bin system is $40 shipped to your door.

Factory Dillon bullet tray.

$42 If purchased with Dillon lever or Ultramount system.
 (Note: These are currently on Backorder from Dillon to us.)

Ultramount press riser system for the Dillon Square Deal B.

Be sure to check out the custom LED lighting kit for the Square Deal at the bottom of this page.


Smooth clean lines, beautiful black powdercoat and 3\16" thick steel riser system lifts your press 9 5\8" up to get that shellplate closer to your eyes, increase stability and ergonomics of your reloading system.
Shown with:
1. optional roller handle conversion.
2. Bullet and empty case & bracket system.

Ultramount for Dillon Square Deal B is $75 shipped (USPS Priority)

Empty case and bullet tray with bracket system.
$40 when purchased with the Ultramount.

$50 by itself.(Shipping cost.)

LED lighting kit for the Square Deal B.
The Dillon Square Deal doesn't have much space available to attach a lighting system to that doesn't get in the way. However, Here is our solution and it works great!

LED OFF                                    LED ON


Comes to you as pictured with the aluminum visor, LED, 110 wall adapter which includes a quick disconnect and on\off switch.  All you need to do is attach it to your press, plug it in and you are good to go!

The LED system for Dillon Square Deal is $29.50 shipped to your door. (USPS Priority)

Extra Dillon toolheads.
650

They are $33.50 shipped

550

They are $33.50 shipped